The hottest issue on the establishment of Printing

2022-10-18
  • Detail

Recently, the National Printing Standardization Technical Committee (sac/tc170) and the magazine printing quality and standardization received calls and letters from readers and enterprises, I expressed great interest in the establishment of the printing sub Technical Committee (SC), which I mentioned in my speech at the unveiling ceremony and press conference of Tianjin National ink (offset) printing pilot standardization test base published in the fifth issue of printing quality and standardization, and asked about the relevant situation. According to the working process of sac/tc170, it is now proposed to establish sub technical committees (SC) in different fields of the printing industry in recent years, in order to convey the information of the National Standardization Management Committee on collecting and establishing new national professional standardization technical committees and sub technical committees to the industry, and put forward preliminary ideas for promoting the development of Printing Standardization in combination with the current situation and development needs of printing standardization, In order to attract the attention of the industry, it is hoped that enterprises with strength and desire will seize the opportunity, lose no time to respond, and do their part to improve the standardization level of enterprises and industries, and promote the development and progress of the whole industry

in order to make the industry know more about the establishment of the new National Professional Standardization Technical Committee (TC) and sub Technical Committee (SC) by the National Standardization Administration Committee, the policies, requirements and personal understanding of the National Standardization Administration Committee in this regard are briefly summarized

I. the plan of the National Standardization Administration Committee on the establishment of TC and SC

the National Standardization Administration Committee clearly pointed out in the 11th five year development plan for standardization that by 2008, the number of technical committees, sub technical committees and working groups will increase from the current nearly 700 to 2000; By 2010, the number of technical committees, sub technical committees and working groups will strive to reach 2600. At the end of 2006, the National Standardization Administration Committee newly approved the preparation of 135 Standardization Technical Committees (including sub technical committees). At present, there are more than 800 technical committees, sub technical committees and working groups across the country

II. About sac/tc170

[[sac/tc170]] was established in 1991. It is an important TC organization approved by the National Standardization Administration Committee. It is an organization engaged in national printing technology standardization under the leadership of the General Administration of publishing and the National Standardization Administration Committee. Under the guidance of relevant national guidelines and policies, sac/tc170 is responsible for proposing working guidelines, policies and technical measures for printing standardization to the National Standardization Administration Committee and other relevant departments, organizing the preparation, revision and standardization management services of relevant national and industrial standards in the industry, and is responsible for the centralized management of standardization in the field of national printing technology, including book printing, newspaper printing, packaging printing, bill printing Label printing and other fields with printing as the main production mode; Pre press, printing and post press processing according to process flow; Offset printing, gravure printing, flexo printing, printing, digital printing and special printing according to printing methods; The printing suitability of printing equipment (such as printing machinery, pre press equipment, post press equipment, etc.) and raw and auxiliary materials (such as paper, ink, plate, blanket, film, plastic, etc.) divided according to the control elements of the product printing process, as well as the requirements of the conditions of the printing process and the safety requirements of the production environment; Basic quality requirements, environmental protection and safety requirements, trade requirements, testing methods, etc. of printing products classified by market access

sac/tc170 is the only Printing Standardization Organization in China that has an interface with the printing technical committee of the international organization for Standardization (iso/tc 130). It is an active member of iso/tc 130 P and has the right to propose, draft, review and vote on international printing technical standards. At present, other TC organizations in China's printing industry contact with five permanent working groups (WG) of iso/tc 130 through sac/tc170

the five permanent working groups of iso/tc 130 are:

Working Group 1: terminology

Working Group 2: prepress data exchange

Working Group 3: process control and related metrology

Working Group 4: media and materials

Working Group 5: safety and human engineering

III Why should we establish new technical committees (TC) and sub technical committees (SC)

the notice on soliciting and establishing new national professional standardization technical committees, sub technical committees and working groups issued by the National Standardization Administration Committee pointed out that in order to implement the standardization development strategy, give full play to the technical support role of standardization in China's construction of socialist market economy, and complete the task of revising national standards, To improve the development level of standardization in China and realize the leap forward development of standardization in an all-round way, the National Standardization Administration Committee decided to expand the scale of the National Professional Standardization Technical Committee, and decided to recruit and establish a new National Professional Standardization Technical Committee (TC), sub Technical Committee (SC) and working group (WG)

at present, the development trend of China's printing industry is strong, and as mentioned above, printing involves many fields, wide and complex. In terms of the standards required by the industry, there are no less than hundreds of rough calculations, while at present, there are only more than 60 items prepared and revised. If only 2 Cantilever beam: 3.5m/s depends on the current Printing Standardization Organization and its work. It takes decades to complete the standards of the whole printing system, which simply does not meet the current and development needs of the printing industry. We must mobilize and rely on various forces to improve the development level. Therefore, the best way to realize the leapfrog development of China's printing standardization is to set up a sub Technical Committee at the right time, subdivide the field of printing standardization work, expand and strengthen the printing standardization team, strengthen the printing standardization work, and form a situation of simultaneous development

IV. why can the printing industry only set up sub technical committees (SC)

according to the regulations of the National Standardization Administration Committee, the name and work field of preparing for the establishment of a new technical committee should not be overlapped with China's existing technical committees, approved and proposed technical committees. Therefore, if China's printing industry needs to establish a new standardization organization, it can only establish a sub Technical Committee (SC). According to this requirement, sub technical committees in different fields of printing can be established, such as pre press sub Technical Committee, book printing sub Technical Committee, newspaper printing sub Technical Committee, packaging printing sub Technical Committee, digital printing sub Technical Committee, bill printing sub Technical Committee, post press sub Technical Committee, printing raw and auxiliary materials sub Technical Committee, etc

v. relationship between sub technical committees (SC) and technical committees (TC)

the relationship between sub technical committees (SC) and technical committees (TC) is clearly stated in the administrative measures for National Professional Standardization Technical Committees (Revised Draft): the sub technical committees are established with the approval of the standardization department of the State Council, A technical organization engaged in national standardization work in a specific professional field under the technical committee. In this regard, we can understand it as follows:

1 The printing sub Technical Committee must be approved by the National Standardization Administration Committee

2. Under the leadership (coordination) of sac/tc170, the printing sub Technical Committee is engaged in National Printing Standardization affairs in corresponding fields

VI. formation principles

we should follow the market needs, clear tasks, reasonable structure, ensure quality and international standards, and encourage competent enterprises to undertake the work of the Secretariat of the sub Technical Committee. If the existing technical committees in China have international counterparts, in principle, they should be subdivided according to the technical committees of the international organization for standardization and in combination with the actual situation of our country, and set up corresponding sub technical committees and working groups; In principle, domestic leading enterprises and backbone enterprises should assume the Secretariat of technical committees involving products or closely integrated with the market

VII. Formation conditions

mainly include:

1 The undertaking unit of the Secretariat has the enthusiasm and strong working ability to support the cause of standardization, and is willing to provide office security such as personnel and funds

2. In line with international standards, try to align with the technical committees (TC) or sub technical committees (SC) of the international organization for Standardization (ISO), the International Electrotechnical Commission (IEC) and other recognized international organizations

3. Comply with the provisions of the articles of association of the National Professional Standardization Technical Committee

VIII. Conditions that units undertaking sub technical committees (SC) should meet

1 High industry popularity and influence

2. Strong technical strength

3. Equip the Secretariat with the necessary standardized technical personnel and full-time Secretariat staff

4. Provide the necessary financial guarantee for the Secretariat to carry out its work

5. Provide the Secretariat with necessary fixed office space, office equipment, etc

IX. composition of sub Technical Committee (SC)

SC is composed of more than 15 members, including 1 Chairman, several vice chairmen, 1 secretary general and deputy secretary general. In the composition of the sub Technical Committee, the members of the technical committee shall serve as the vice chairman of the sub technical committee or the deputy secretary general or above

for the product standardization committee, the representatives of the chairman (including the vice chairman), the Secretary General (including the Deputy Secretary General) and the ordinary members of the same unit shall not exceed 1 respectively, and the Secretary General and the chairman shall not come from the same unit

X. source of activity funds

the main sources of TC and SC activity funds at all levels are:

1 Funds provided by the standardization department of the State Council and the relevant administrative departments of the State Council

2. Fees paid by members and observation members

3. Income from carrying out standardized consulting and services in this field

4. The Secretariat bears the funds provided by the unit

5. Support from all walks of life for standardization work in this field

6. Others

Xi. Relevant policies of the National Standardization Administration Committee on supporting enterprises to participate in standardization affairs

1 Form a new mechanism for enterprises to participate in the revision of different types of machines by international standards and national standards, so that enterprises have the opportunity to obtain the dominant position and service platform in the revision of standards at home and abroad

2. Form a new mechanism for experts from leading enterprises to participate in international and domestic standardization technical committees, sub technical committees and working groups, so as to strengthen the guidance and coordination of the formulation of important technical standards and improve the scientific decision-making level of standardization work

3. Accelerate the construction of technical committees and effectively increase the number of technical committees, sub technical committees and working groups. Starting from the establishment, composition and operation mechanism of the technical committee, leading enterprises should become the main body of standardization work, and enterprises should strengthen their participation in standardization work

4. Encourage competent enterprises to undertake or participate in the work of the Secretariat, strengthen the correlation between standards and the market, and promote enterprises as the main body to undertake the work of the Secretariat of the Technical Committee for product standardization

5. Experts from enterprises are encouraged to join the Standardization Technical Committee, especially the product or market related technical committee. Support enterprises to apply for national standard formulation and revision work projects, and support enterprises to directly

this article comes from the Internet, and the copyright belongs to the original author, which is only for everyone to share

Copyright © 2011 JIN SHI